Extrusion Base 20

 

Base-extrusion 20x20
type D01-5

With this profile most tasks of construction can be solved owing to the optimal weight and firmness conditions.

 

Face  extrusion 20x20
type D01-8

Attachments of sensors or stopper, as subconstruction for a flexible surface attachment application.

 

Softline extrusion 20x20
type D03-8

Aesthetic conclusions for smallest constructions. Signs, modelbuilding, small showcases with a nice design can be made with this profile.

 

Base extrusion 20x40
type D01-7

This more stable extrusion, is also often used in combination with the base 30mm.

 

 

Box frame extrusion 20x40
type D01-6

This box frame extrusion was developed especially for tradefair constructions. On one side for the receptacle of 16mm, on the other for 6/8 mm of chip boards.

 

Box frame extrusion 20x47
type D01-2

Often this extrusion is used together with the base octangonal extrusion for exhibition. It finds in addition use everywhere, where lightweight constructions are needed. In combination with the 30x30 corner and front lining extrusion this addition behind the assigned panels can be accomplished without problems and strengthen the construction.

 

20mm base octagonal extrusion
type D01-1

It is used in the trade fair construction and shop fitting. At the end a threaded insert can be pressed in, which is meant for placing leveling feet.

 

20x95 box frame extrusion
type D01-4

Mainly in the trade fair construction and shop fitting where this easy but very stable extrusion is used. Also in apparatus engineering it is used if closed fronts are in demand. In addition, as baseboard of gangways.

 

20x150 face extrusion
type D19-5

This front extrusion is also one fo our special extrusions. Through the displacement of the center holes a universal use is restricted. The width closed surface offers good possibilities to realize boardings and fronts from machine racks.