Extrusion Base 50

Base extrusion 50x50
type A01-1

With this profile most tasks of construction can be solved owing to the optimal weight and strength conditions.

Heavy duty extrusion 50x50
type MA1-1

A heavy version of the 50x50 extrusion. Drillings for direct threading are just as useful as the small guided slots to cover the extrusion openings.

Face extrusion 50x50
type A01-8

Face extrusions are used whenever closed surfaces are demanded. Because on the one hand it makes structures optically calmer, on the other hand it reduces possible dirt deposits to a minimum.

Corner extrusion 50x50
type A01-7

Extensions at the closed sides can be realized, by drilling the extrusion and fitting thread plates behind it.

Double face extrusion 50x50
type A02-4

For linings of all kinds including constructions where mostly closed extrusion are needed and for applications with elegant design.

Angle extrusion 50x45°
type A02-8

The angle extrusion permits elegant and soft contures and makes a universal use possible for different constructions.

Base extrusion 50x100
type A01-2

Under normal conditions this base extrusion is used as a cross beam. The optimal cross section makes extremely various applications possible.

Heavy duty extrusion 50x100
type MA1-2

Like the base extrusion A01-2 the heavy duty extrusion is used often as a cross beam. Because of its optimal load-carrying capacity at a minimum weight there are no borders set for this execution.

Face extrusion 50x100
type MA1-4

In the large interior cavity a medium can be led. (air, gas, water, oil etc..) The front prevents any contamination, thanks to the covered thread disk guidance are nevertheless everywhere extensions possible.

Base extrusion 100x100
type MA2-5

A universal extrusion, which is used particularly in machines and equipment construction. Its qualities are: - high strength- optimal torsion stiffness -  low weight.

Heavy duty extrusion 100x100
type MA1-5

An extraordinarily durable extrusion, which is used as support, carrier or also can be used to hold liquids and gases. Very suitable together with the heavy duty extrusion 100 x 200 type MA1-9 for the building of portals.

Beam extrusion 50x50
type MA1-3

As the name already says, this extrusion is used because of its excellent mechanical properties mainly for high loads.

Heavy duty extrusion 100x200
type MA1-9

For the building of portals with large column distances or everywhere where very high loads must be carried with a small deflection point.